安全电脑打造（Secure computer build）.docVIP

安全电脑打造（Secure computer build） port 123 service in Windows Time off 135 port is closed First, click start - run, type dcomcnfg, click OK to open the service component. Two, in the pop-up component services dialog box, select computer option. Three, in the computer option on the right side, right click my computer and select properties. Four, in the my computer properties dialog box default tab, remove the distributed COM is enabled on this computer before the hook. Five, select the default protocol tab, select the connection oriented TCP/IP, click delete button. Six, click OK, the setup is complete, restart immediately after the closure of 135 port. Another method: use sixteen hex editor, such as WINHEX, UltraEdit and other software. Run UltraEdit, find the SYSTEM32 system folder rpcss.dll through the Toolbar open document button. Then click the search menu in the search command, 3100330035 to find the string in the pop-up window, will find it to replace the 3000300030, and save as other files in the directory, it is recommended that you save in the C root directory. Restart the system boot to the DOS state, running into the C: copy rpcss.dll c:\windows\system32\rpcss.dll, and then restart the computer, you will find 135 ports have been closed. 139 In Windows 2000/XP, you can open the control panel, double-click the network connection icon, open the local connection properties; then, in the properties window of the general tab and select Internet protocol (TCP/IP), click properties button; and then open the window, click the advanced button in; advanced TCP/IP settings window, select the WINS tab, disable the TCP/IP NetBIOS in the NetBIOS settings area. 1025alg 1900 service SSDP Discovery Service 445 - port It can be achieved by modifying the registry method is: regedit, open the registry editor. Then start here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters, a new DWORD value below SMBDeviceEnabled, the key is 0. 3389 my computer right click