富莱克3200说明书（Fleek 3200 instructions）.docVIP

富莱克3200说明书（Fleek 3200 instructions） Fleek KLECK3200NT manual Author: fleek source: northeast water release time: 2011-09-21 16:16:54 Fleek KLECK3200NT manual Notes: 1. set the daily time to 12:01 P.M. 2. press Set Up and Set Down keys at the same time for 5 seconds 3. each time the cycle key is displayed, the content is changed once. All content display will be returned to the running state in turn. 4. in the display directory, you can set it by Set, Up, or Set Down. 5. because of the valve program, some options are not displayed and are available for selection When the time shows 12:01 P.M., press both the Set Up and the Set Down key, and hold for 5 seconds. Valve type: l For example: 2750 control valve [2750] = default model 2850 control valve [2850] 2900 control valve [2900] 2930 control valve [2930] 3130 control valve [3130] 3150 control valve [3150] 3900 control valve [3900] Regeneration: fleek flow control valve, valve Laikeduo rich road For example: downstream [dF] = default state Upstream, first absorb salt, [UfbF] Upstream, first water injection, [UFFF] System type For example: system #4, time delay type [4tc] = default mode System #4 traffic instant type [4FI] System #4 traffic delay type [4Fd] System #5 traffic instant type [5FI] System #6 traffic instant type [6FI] System #7 traffic instant type [7FI] System #9 traffic instant type [9FI] Valve position For example: the first valve (main valve) [LEAd] Second, third, four valves (side valves) [LAg] = Default Note: this item is displayed only when the system is #5, #6, #7, and #9. [RSoF] = default [RS-3] The remote signal begins to regenerate: For example: do not set It takes 3 minutes to start the signal regeneration Note: system capacity, capacity, safety factor, hardness of water supply, flow meter size and output setting of metering pump will not be displayed, and the corresponding function will no longer be available. . [U--1] = default [U--4] Display form For example: gallon M3 41096 Rev A (2/03) 3200