焊接工艺1（The welding process of 1）.docVIP

焊接工艺1（The welding process of 1） Thirty-first. 5 years in October 2007th advantages of laser technology, well, but also has a single melting depth of welding heat affected zone, sensitive and changes of [1] material components production efficiency. Laser beam welding in the welding heat input higher speed and lower welding deep and narrow, but also has the sensitivity to the weld gap of high power laser high cost disadvantage. 2 laser arc hybrid welding power with full advantage of this two kinds of heat sources respectively, and their complementary deficiencies, with deep penetration, high stability, high welding speed, small welding deformation and high gap bridging ability and other advantages, and in the industrial field more and more attention to by [2]. Author: Yan (19812), male, postgraduate, mainly engaged in laser welding and laser welding in the light of the 2 composite arc. 3 correspondent. Article number: 100123806 (2007) 05204892041 (Engineering Research Center, Huazhong University of Science and Technology, Wuhan 430074 national 1. laser processing; 2. Angel yeast Limited by Share Ltd, Yichang 443003) source spacing influences of process parameters on the weld shape. The laser power is greater than 2. 5kW, will produce the keyhole effect on the weld penetration effect is remarkable; and when the arc current is less than 150A, the relationship between heat input welding width and two heat source is close, when the current is more than 150A, only the arc current bead width is determined by the distance between a heat source; the best value of 2mm ~ 3mm, at this time, the welding penetration can be increased by 1.46 times to 2.54 times. The results show that the improved hybrid welding of 316L stainless steel welding. Keywords: laser technology; hybrid welding; tungsten inert gas welding; laser welding in CLC number: TG665 current, welding industry commonly used in the production of tungsten inert gas (tungsten inert, gas, TIG) welding process with weld q