焊条温度（Electrode temperature）.docVIP

焊条温度（Electrode temperature） The electrode is often due to moisture absorption and the process of the bad performance, which increases the arc instability, splash, and prone to defects such as pores and crack. Therefore, the electrode before use must be strictly drying. General acid electrode drying temperature 150--200, time 0.5-1 hours; basic electrode drying temperature of 350--400 DEG C, 1--2 hours after drying in an incubator at 100--150, with. JB4709 has recommended the temperature and time of heat preservation (non mandatory standards), but the actual use of the best reference electrode temperature and time warranty requirements! You said J427 belongs to the basic electrode, temperature is at 350 DEG C, 1H insulation. Electrode J422 and J427 what is the difference? J422 acid electrode type GB E4303 Structural steel welding rod, the tensile strength of the weld metal is not less than 420Mpa, calcium oxide coating, AC / DC, mainly used for welding of low carbon steel and low alloy steel grades such as 09Mn2. J427 basic electrode type GB E4315 Structural steel welding rod, the tensile strength of the weld metal is not less than 420Mpa, low sodium hydrogen coating, DCRP, mainly used for welding low carbon steel and low alloy steel such as 09MnSi. Welding material for welding 20G steel Low pressure vessel 20g 20g welded steel pipe flanges with what welding materials, welding structure and welding of 20 steel with what welding materials, what welding material 20g steel welded 20 steel. You add Master Jiqiu ah problem: The thickness of the material respectively: The flange thickness of 38 steel tube wall thickness 15 The flange thickness of 28 steel tube wall thickness 10 I think the SMAW words with J426 (model E4316), J427 (model E4315) electrode is better. Because it is JB/T 4709-2000 steel pressure vessel welding materials recommended the rules. J422 is easy to weld and welding, forming beautiful, but the mechanical properties as well as J426 and J427. J426 and J4