13春学期《轧制理论与工艺》在线作业3（13 spring semester rolling theory and technology online homework 3）.docVIP

13春学期《轧制理论与工艺》在线作业3（13 spring semester rolling theory and technology online homework 3） Northeastern University, 14 spring, 13 autumn, East, 13, spring semester, rolling Northeastern University, 14 spring, 13 autumn, 13 spring semester, rolling theory and technology online homework 3 Total score: 100 test time: - Radio examination A multiple-choice question Judgment question Radio examination questions (6 questions, 36 points) 1. the function of the stretch reducing mill is () A. reduces outer diameter and reduces wall thickness B. reduces outer diameter without reducing wall thickness C. reduces wall thickness without reducing outer diameter D. or more is wrong Full marks: 6 The most important advantage of the 2. cone roll piercer and barrel roll piercer is that The piercing efficiency of the A. cone piercer is higher B. cone roll piercer is more automated The axial extension deformation of the C. is favorable, the additional deformation is small, the quality of the inner surface is good, and the wall thickness is high D. is good for biting Full marks: 6 3. () for steel and billet, rolling is generally expressed as the relationship between the energy consumption per ton of products and the total elongation coefficient, whereas for the strip, the strip is generally expressed as the relation between the energy consumption per ton of products and the strip thickness. A. unit rolling force B. unit energy consumption assignment answer has not uploaded, first for everybody review uses, if needs the answer specific, looks at my registration name to look for the curve C. unit rolling moment D. unit static torque Full marks: 6 The bite of 4. cross piercing mill must be satisfied: A. rotation condition B. forward condition C. is to rotate the conditions, but also forward conditions D. force balance condition Full marks: 6 The nominal roll diameter of the 5. rail beam mill is ( A. diameter of 750mm~ with 1000mm B. diameter of 650mm~ with 950mm C. diameter of 750mm~ with 950mm