ktv调音师必读（KTV tuner reading）.docVIP

ktv调音师必读（KTV tuner reading） KTV tuners must read 1, what is the sound box withstand power? As the name suggests, the speakers power is that the input speakers do not exceed this mark, the power will not be damaged, you can afford it. There are several ways to express the sound power of the loudspeaker box. It is easy to cause the misunderstanding of the user, thus improper use, resulting in damage to the speaker. In the Parameter annotation of the loudspeaker box, some are marked the rated power, that is long-term power, which means that the long-term use in this power state will not damage. Factory testing rated power is in the constant temperature of 20 degrees, with pink noise signal for 48 hours continuous work shall prevail. In the KTV compartment, the use of the environment is relatively bad, the music also contains a lot of big dynamic peak signal, it is recommended that the input power is less than 20% of the rated power, the use of speakers, will be much safer. Some speakers parameter is marked peak power, this value is rated power of 3-4 times, such as BMB brand CS-450MKII power mark is the peak power 450W. The speaker of the peak power of the bear is conditional, setting time is 1 seconds, repeated only if more than 10 times, may be damaged, to be especially careful use of peak power marked speakers, recommend the use of power does not exceed the peak power of 1/4. , 2. What is the rated output power of the amplifier? The rated output power of a power amplifier refers to the long-term output power without distortion (generally means that output distortion is not more than 1%). In this state, the power amplifier is safe and reliable. In fact, there are several reasons: one is the requirement of the voltage to the standard 220V, if the output power fluctuation, power amplifier will change; the second is the load impedance (speaker) regulations, such as 2*150W (8) of the power amplifier, the 4 load case can output power will reach about 230W. The factory in