《表面工程技术与缓蚀剂》2014年春学期在线作业(二)（The surface engineering technology and corrosion inhibitor 2014 spring semester online homework (two)）.doc

《表面工程技术与缓蚀剂》2014年春学期在线作业(二)（The surface engineering technology and corrosion inhibitor 2014 spring semester online homework (two)） The surface engineering technology and corrosion inhibitor 2014 spring semester online homework (two) A RadioButtonList (a total of 10 questions, a total of 30 points.) 1. the inhibitor is divided into film, film and film type precipitation adsorption type inhibitor, the classification is based on () The chemical composition of A. The electrochemical mechanism of B. The physical and chemical mechanism of C. The application of D. medium 2. the following does not belong to the vapor deposition technology (for) A. vacuum evaporation B. sputtering C. electric spark coating The chemical vapor deposition of D. E. molecular beam epitaxy (3.) is to study the interaction of surface friction, in the process of movement occurred in the relative wear and lubrication of a science and technology A. tribochemistry B. Tribology C. friction surface science D. friction and corrosion 4. of the surface diffusion and surface quenching for the representation of the error () A. surface diffusion layer between metal matrix and metallurgical bonding, high bonding strength, the layer is not easy to fall off or peel B. surface diffusion is not affected by the geometry of a workpiece workpiece limitations, small deformation, high precision, good dimensional stability C. surface quenching refers to the workpiece surface heating and cooling, and a surface treatment technology of surface hardening D. after surface diffusion and surface quenching, composition, microstructure and properties of workpiece surface are changed 5. of the plasma expression error is () The presence of A. plasma has a specific space and time limit B. is a kind of conductive fluid C. particle movement without electromagnetic influence and control D. enrichment of ions and electrons and excited atoms and molecules and free radicals very reactive state 6. characteristics of the composite surface e