改造完美ccproxy（Perfect ccproxy）.docVIP

改造完美ccproxy（Perfect ccproxy） Better in Security run: perfect CCProxy 6.2 Safety China update: 2005-12-13 00:55:00 editor: Hotspot： CCProxy 6.2 is a very good use of the software, but not the registered version only allows three users, so I try to break it. This crack is not our ultimate goal, the program will start to leave the icon in the system tray, we must get rid of it, let it run better in broilers. Cracking tool: Ollydbg 1.10b (fly modified version) W32Dasm v10.0 finished enhanced version PEiD V0.92 Keymake1.73 Study on Use PEiD V0.92 to check whether the target shell - this software could not shell! Run the CCProxy main program, see if it is a what, why so cattle? To give a small face, looks quite good, will give an error code error. Static analysis of available information Since we enter the wrong registration code program dialog box will pop up, then we can use this information to find the first error program of the comparison part. The static analysis of the target file with W32Dasm. In the Toolbar character string reference, find the program for our error message? It is normal! This software more cattle, learning English, we in the CCProxy main program Settings - Advanced - other software that can change the content. It then look at the software error (Fig. 2), and is not in a string character as the error message, as shown in figure 3. Double click the error string, we will see the application assembler code, as shown in Figure 4, 0040e33e code for the program key jump, jump away we failed, so as long as the 0040e33e breaking a code NOP off it. Use WinHex to load the CCProxy main program, NOP program 0040e33e code, re run the software registration, success! But since the software after registration and no effect, or unregistered version. May be the starting procedure in the register code was verified. We can find a CCProxy.ini file in the installation directory of the program, this program is the configuration file, our registration code here for a w