防雷工程中的等电位连接问题（Equipotential connection problem in lightning protection engineering）.docVIP

防雷工程中的等电位连接问题（Equipotential connection problem in lightning protection engineering） Equipotential connection problem in lightning protection engineering Introduction When we are detecting lightning protection, we usually only use ground resistance Test the instrument to measure whether the grounding resistance of each earthing point conforms to the relevant one Specification requirements, the grounding resistance is lower than the standard requirements, that is qualified, otherwise For unqualified, often neglected to check equipotential bonding. Even check Records are rarely recorded and rarely reported in the test report. In design Lightning protection project, designers are most concerned about the power, signal and other lines How many class lightning arresters are installed on the proper parts of the road and the equipotential connection is made The measure is only a brief description. In the construction of lightning protection works by Due to the limited working conditions, the equipotential connection is often avoided because it is difficult to realize Connection procedure. Equipotential and equipotential bonding Equipotential is to point to the space that needs lightning protection and equipment, be struck by lightning When the lightning overvoltage occurs, the parts of the system maintain the potential equal to that of the equipment No potential difference exists. In fact, it is difficult to reach the potential difference, Only the potential difference is relatively small to below the level of dielectric breakdown. Equipotential bonding is to put all the gold inside and around the building A substance such as concrete, steel, water pipes, gas pipes, and other metals Pipes, machinery, foundations, metal objects, and other large buried metal objects, Cable metal shield, protective earthing of power system, connection of building The ground wire and so on are all connected by electrical connection Welding or Reliable electrical connections 0, make the whole bu