汽车冲压（Automobile stamping）.docVIP

汽车冲压（Automobile stamping） In the automobile manufacturing metal parts 60%-70% by plastic forming, stamping processing is an important means of complete metal plastic forming, it is one of the metal processing method of the most traditional and most important. Automotive stamping technology such as various body cover, car support, structure reinforcement, and a large number of auto parts, such as engine exhaust pipe and muffler, hollow camshaft, oil pan, engine support, frame structure, horizontal rails, it is by stamping technology positively precisionmulti function, high efficiency and energy saving, safe and clean production and direction of development, manufacturing process and quality level of stamping workpiece, has a direct influence on the automobile manufacturing quality and cost to a great extent. The so-called stamping process refers to the adaptability of stamping parts to handicrafts, that is, the stamping parts in size, size, accuracy and benchmark, structure, shape, etc., are consistent with the stamping process requirements. Automobile stamping parts should have good handicraft and economy, and the important marks to measure their level are the number of stamping parts, the number and size of the body assembly, the structure of stamping parts and so on. Reduce the process of stamping process, means to reduce the number of stamping parts, transmission device to save tooling quantity and simplify the stamping process, reduce operator and press area, is an excellent measure to save investment and energy consumption, so the manufacturer can press the number of stamping process design as an important way to reduce the automobile manufacturing cost, even to improve product design to meet the requirements of the manufacturing process. At the same time, you should also use the largest size of a reasonable body mass components, such as block type body, left and right side panels and roof cover panels, both to make the car pleasing in appearance. Reducing air