法兰克g代码（Frank G code）.docVIP

法兰克g代码（Frank G code） G01 linear interpolation 1. format G01 X (U) Z (W) F_ _ _; The linear interpolation moves from the current position to the command position in a straight line and at a given rate of movement. The absolute coordinate value of the position required by X and Z: to move. U, W: requires incremental coordinate values for the positions moved. 2. example Absolute coordinate program G01 X50. Z75. F0.2; X100; Incremental coordinate program G01 U0.0 W-75. F0.2; U50. G02/G03 arc interpolation (G02, G03) 1. format G02 (G03), X (U), __Z (W), __I__K__F__; G02 (G03), X (U), __Z (W), __R__F__; G02 - clockwise (CW) G03 - reverse clock (CCW) X, Z - the end point in the coordinate system U, W - the distance between the starting and the finishing points I, K - the vector from the starting point to the center point (radius) R - arc range (maximum 180 degrees). 2. example Absolute coordinate system program G02, X100., Z90., I50., K0., F0.2 or G02, X100., Z90., R50., F02; Increment coordinate system program G02, U20., W-30., I50., K0., F0.2; or G02, U20., W-30., R50., F0.2; G30 second origin returns (G30) The coordinate system can be set with the second origin function. 1. set the coordinate value of the tool starting point with the parameter (a, B). The points a and B are the distance between the origin of the machine tool and the point of the tool. 2. when programming, use the G30 command instead of G50 to set the coordinate system. 3. after the execution of the first origin, the tool moves to the second origin regardless of where the tool is actually located and when it hits the command. 4. change the tool at the second origin. G32 thread cutting (G32) 1. format G32, X (U), __Z (W), __F__; G32, X (U), __Z (W), __E__; F - thread lead setting E - pitch (mm) When compiling the thread cutting program, the spindle speed RPM must be uniformly controlled (G97), and some characteristics of the threaded part should be considered. In thread cutting mode, movement rate control