牙买跌（Jamaica）.docVIP

牙买跌（Jamaica） The structure and performance characteristics of the 1 tapered roller thrust bearing The structure and characteristics of tapered roller thrust bearing? Due to the rolling thrust tapered roller bearings for tapered roller, In the structure due to raceway bus bus and rolling washer all converge on the bearing axis of a point, so the rolling table The surface can form pure rolling, the speed limit is higher than the cylindrical roller thrust bearing. Thrust tapered roller bearings can withstand axial direction To load. Tapered roller thrust bearing type code 90000. Because the production of tapered roller thrust bearing less, The factory has produced models for non standard size, while the standard size of the series, thus producing fewer varieties. At present there is no national standard of this kind of bearing size introduction. The structure and characteristics of thrust angular contact ball bearings? PUSH Force contact angle of angular contact ball bearing for thrust commonly used 60 degrees of angular contact ball bearing is generally two-way axial thrust angular contact ball Bearing, mainly used in precision machine tool spindle, general combining with double row cylindrical roller bearings, can withstand two-way axial The load, with high precision, good rigidity, low temperature, high speed, has the advantages of convenient assembly and disassembly. Double row tapered roller bearing The structure and characteristics of double row tapered roller bearing structure is various, the most is 35000, there is a pair of outer ring raceway And the two inner ring has a spacer ring, two ring, change the spacer thickness can be adjusted clearance. This type of bearing under radial At the same time, the load can withstand two-way axial load, axial displacement can limit shaft and housing in bearing axial clearance range. 2 thrust roller bearings for main shaft axial load, radial load, but the radial load shall not exceed 55% of the axial load. Compared with oth