监控系统常见故障及解决方法（Common faults of monitoring system and Solutions）.doc

监控系统常见故障及解决方法（Common faults of monitoring system and Solutions） Common faults and solving method of monitoring system The fault caused by incorrect A. power equipment The incorrect power generally has the following several possibilities: power lines or power supply voltage is not correct, the power is not enough (or a road supply line size is not enough, the big buck), transmission line power supply system of the short circuit, open circuit, instantaneous overvoltage etc.. Especially because of the power error or instant overvoltage cause equipment damage occurs. Caused by the fault of the B. line Deal with the equipment connecting line, produce open circuit short circuit line insulation, as a result of bad MIS wiring equipment (or components) damage, performance degradation or equipment itself is not so damaged, but reflects the phenomenon is in equipment or parts of the body. For some devices (such as PTZ cameras and three variable lens attachment) there are many, often not handled properly, there will be the problem. Especially the quality of some of the connector bad connection process is not good, is a common cause of problems. In this case, we should calmly analyze according to the fault phenomena, judgment in several lines is due to a problem which makes the connection line fault phenomenon. This will put the problem of narrowing the scope of the. For example, a three variable lens camera image signal is normal, but could not control, do not need to check the video output line, and as long as the control line on the line to check the lens. In addition, connectors, especially BNC type of joint, welding technology, video line connection and installation process requirements are very high, if handled properly, even if the stage of commissioning and trial run without problems, but the operation for a period after the emergence of the problem. It is particularly worth noting that with the pan tilt camera with a full range of motion, a long time, resulting in line