监控系统常见的故障现象及其解决方法（Common faults in monitoring system and their solutions）.docVIP

监控系统常见的故障现象及其解决方法（Common faults in monitoring system and their solutions） In a monitoring system into the commissioning phase and commissioning phase and after delivery, there may be such a failure phenomenon, these phenomena are not normal operation or failure, or is not up to the technical index system design requirements; or the overall performance and quality is not ideal, some so-called soft. These problems are unavoidable for a monitoring project, especially for a complex and large-scale monitoring project. When problems arise, it is the duty and responsibility of the engineers and technicians to try to solve them. In a monitoring system, problems occur in debugging and commissioning phases. A system that has been tried and checked and delivered. Generally speaking, there should be no problem in a short period of time. Even when the system is in use, problems occur in the quality of the equipment or the quality of the construction (especially the quality of the transmission part). Here are some of the more common faults that are available to the reader as a reference. Faults and solutions arising from or reflected by equipment and components Before the installation of equipment (or components), commissioning and electrifying test shall be carried out as required. Nevertheless, it is common for equipment (or components) to cause problems due to some reasons during installation. A, power failure caused by incorrect device. The incorrect power generally has the following several possibilities: power lines or power supply voltage is not correct, the power is not enough (or a road supply line size is not enough, the big buck), transmission line power supply system of the short circuit, open circuit, instantaneous overvoltage etc.. In particular, equipment failures due to power supply errors or transient overvoltage have occurred. B, For some lines, especially with the equipment connecting line is not handled well, produce open circuit short circuit line insulation,