磁珠和电感（Magnetic beads and inductors）.doc

磁珠和电感（Magnetic beads and inductors） Magnetic beads by oxygen magnet, and the coil of the magnetic core inductance by magnetic beads, the AC signal is converted to heat, the AC storage inductor Up, slow release. The beads have greater effects on the high frequency signal, general specification for 100 euro /100mMHZ, The resistance at low frequency is much smaller than the inductance. The equivalent resistance of the inductor can be obtained by Z=2X3.14xf. Ferrite beads (Ferrite Bead) is the application of fast development of an anti interference element, cheap, easy to use, high frequency filter Noise effect. In the circuit as long as it can wire through (I use are like ordinary resistance like, and through the wires have been glued, there are tables Surface mount form, but rarely sell). When the current in the wire passes ferrite of low frequency current hardly what While the current impedance, high frequency will produce large attenuation. High frequency current distributed in the form of heat in which its equivalent The circuit is an inductance and a resistance in series, the two element values are proportional to the length of the beads and. Bead type many manufacturers should provide technical indicators, especially the relationship between impedance and frequency of magnetic curve. Some magnetic A plurality of holes with beads, wire through increased impedance (through times square, beads) but increased at high frequency With the ability of noise reduction may not as expected, rather than a few beads to be better in series. Ferrite magnetic materials, will be through the current is too large to produce magnetic saturation, permeability decreased sharply. The current filter should be used The bead structure specially designed, but also pay attention to the cooling measures. Ferrite beads can be used not only to remove high frequency noise in the power supply circuit (which can be used for AC and DC output), also can be widely used In other circuits, the volume c