磁珠和0欧姆电阻（Magnetic beads and 0 ohm resistors）.doc

磁珠和0欧姆电阻（Magnetic beads and 0 ohm resistors） Magnetic beads Magnetic beads are used to suppress high frequency noise and spike interference on signal lines, power lines, and to absorb electrostatic pulses. Magnetic beads are used to absorb ultra high frequency signals, such as some RF circuits, PLL, oscillating circuits, Ultra high frequency memory circuits (DDRSDRAM, RAMBUS, etc.) are required to add magnetic beads to the power input section, Inductance is a kind of energy storage device. It is used in LC oscillation circuit, low frequency filter circuit and so on. Its frequency range is rarely over 50MHZ. Magnetic beads have high resistivity and permeability. They are equivalent to resistors and inductors in series, but the resistance and inductance vary with frequency. function The main function of magnetic beads is to eliminate them in the structure of the transmission line (circuit) The RF noise and the RF energy are the alternating sinusoidal components superimposed on the DC transmission level, and the DC component is a useful signal. To eliminate these unnecessary signal energies, use chip beads to play the role of high frequency resistors (attenuators). Magnetic beads have very high resistivity and permeability. They are equivalent to series of resistors and inductors, but the resistance and inductance vary with frequency. He has better high-frequency filtering characteristics than conventional inductors, and exhibits resistance in high frequency, so it can maintain a high impedance in a wide frequency range, So as to improve the effect of FM filtering. Inductors can be used as power filters. The circuit symbol of magnetic bead is inductance, but the magnetic beads can be seen on the model. In the circuit function, magnetic beads and inductors are the same principle, but the frequency characteristics of different bale. Company Magnetic beads have a great influence on high frequency signals. The general specifications are 100 euro /100MHZ, which is much smal