第一章 钢筋混凝土材料的力学性能(土木)（Chapter 1 Mechanical Properties of reinforced concrete materials (Civil Engineering)）.docVIP

第一章 钢筋混凝土材料的力学性能(土木)（Chapter 1 Mechanical Properties of reinforced concrete materials (Civil Engineering)） This article is contributed by wangchen_698 Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Chapter 1 Materials for reinforced concrete structures The object of reinforced concrete structure and mechanics is different, it is aimed at specific material, so it is necessary to fully understand the properties of materials. This chapter mainly talks about three questions: first, the varieties and mechanical properties of steel bars. Two. Mechanical properties of concrete. Three. The bond and anchorage of steel and concrete and reinforced the connection of the first section and the mechanical properties of varieties classification: (a) classification: according to different classification methods according to the 1. diameter reinforced d = 6mm (6 ~ 40) Steel wire D, P, 6mm (2.5 ~ 5.5) 2., according to chemical components Carbon steel reinforced ordinary low alloy steel bars What is carbon steel? The composition of steel: iron, carbon, silicon, manganese, sulfur, phosphorus and other elements. Carbon containing 1.7% is steel, in which silicon, manganese, vanadium and titanium are alloy elements, and sulfur and phosphorus are harmful elements. When the content exceeds 0.045%, it will make the steel brittle and reduce the plasticity significantly, which is not conducive to welding. According to the amount of carbon, carbon steel is divided into: 1.4%~0.6% is high carbon steel, 0.55%~0.25% is medium carbon steel, 0.25% is low carbon steel, and the higher carbon content, the higher the strength of steel, the worse the plasticity. For example: grade HPR235 steel, carbon content between 0.14%~0.22%, known as low carbon steel reinforcement. What is a low alloy steel bar? When carbon steel is smelted, some alloying elements such as manganese, silicon, nickel, titanium and v