钢砂钢丸在管道喷砂(抛丸)射除锈中的处理方法以及钢砂配比（Steel shot shot in the pipeline (blast) blasting processing method and the ratio of steel shot derusting）.docVIP

钢砂钢丸在管道喷砂(抛丸)射除锈中的处理方法以及钢砂配比（Steel shot shot in the pipeline (blast) blasting processing method and the ratio of steel shot derusting） Steel shot shot in the pipeline (blast) blasting processing method in shot derusting Shot shot derusting is a high-power motor driven spray (throw) shot blade rotating speed, the steel shot, steel cut wire, minerals and other abrasive spraying on the surface of the steel pipe under the action of centrifugal force (ejection process, not only can completely remove the dirt and rust, oxide, and abrasive role in the violent impact and friction force of steel next, can achieve the required uniform roughness. Spraying (ejection, descaling, and selective spraying) is very important in order to achieve the desired rust removal effect. Should be chosen according to the steel abrasive surface hardness, corrosion degree, the original requirements of surface roughness, coating type, mixed abrasive with steel shot shot is to achieve a more ideal way of cleaning effect. Spraying (derusting) can not only enlarge the physical adsorption of the pipe surface, but also enhance the mechanical adhesion between the anti-corrosion layer and the surface of the pipe. Therefore, spraying (spray derusting) is an ideal method of rust prevention for pipeline corrosion protection. Generally speaking, shot peening is mainly used in the inner surface treatment of tubes, shot blasting (sand derusting is mainly used for the outer surface treatment of tubes. Several problems should be paid attention to when using spray (throwing) to remove rust. (1) for the construction technology of epoxy, ethylene and phenolic coatings, the surface of steel pipe is generally required to reach near white level (Sa2.5). Practice has proved that the derusting grade removes almost all of the scale, rust and other dirt, anchor depth reached 40~100 mu m, fully meet the needs of the coating and adhesive steel, spray casting derusting process (available lower operation cost and stable and r