铁矿（iron ore）.docVIP

铁矿（iron ore） Types of geological prospecting and exploration density of iron ore In the geological prospecting of iron ore, it is important to determine the density of the mineral exploration project by using the prospecting engineering to control the ore body according to the economic principle. On the basis of orebody distribution, size, morphology, structure complexity and ore quality changes, which is in accordance with the controlled degree of difficulty, the iron ore deposit is divided into I, II, III, IV four exploration types, and different types of exploration engineering density with different layout engineering, in order to control the iron ore body and the change of the orebody. In our countrys iron ore geological exploration work, we often use empirical method, analogy method, exploration line profile precision analysis method, thin gas method, exploration and production data comparison method to determine exploration type and exploration engineering network degree. In recent years by using the statistical analysis method to determine the ore prospecting grid, the geological analogy method is often used in China known iron ore, iron ore pangjiabu 1 type has metamorphosed sedimentary iron ore, Nanfen marine sedimentary type II; Panzhihua iron ore magma genesis, water Meishan, and because of the simple form, the top iron ore grade of small changes, also belong to this type III type; Daye, Tieshan Jinling, West Shimen, Gushan Iron Mine, the general is contact metasomatic type and continental volcano rock type iron deposit; type IV iron ore in small scale, complex shape and attitude change large ore quality and quantity distribution of instability and discontinuity. 2 geological exploration degree and depth of iron ore The depth of iron ore exploration should be determined according to the actual requirements of mine construction and production. According to the current mining technology in China, the depth of exploration for iron ore is generally 300 to 50