实验试题（Experiment test）.docVIP

实验试题（Experiment test） Completion 1. (drying) is a standard method for determination of water content in soil, the soil time shall not be less than (8) hours for sand soil shall not be less than (6) hours of T soil organic matter containing more than 5%, should be in control of temperature (65-70 DEG C) under constant temperature. 2. the inhomogeneous coefficient Cu of soil reflects the range of soil particle distribution. The curvature coefficient Cc describes the shape of the soil particles 3. soil consists of the following three parts (solid phase), (liquid phase) and (gas). 4. commonly used method of soil density (with cutting ring), (sand filling method), (wax sealing method), (electric sampler method) etc.. 5. the plasticity index of soil means the difference between the liquid limit and the plastic limit of soil. The larger the IP, the higher plasticity of soil. 6. soil compaction test aims to obtain (maximum dry density) and (optimum water content), the small test cylinder is suitable for soil with particle size not greater than (25) mm; large test cylinder using particle size is not greater than (38) mm soil. 7. soil compaction test, test cylinder humidification soil quality 3426.7g, test cylinder quality 1214g, test cylinder volume 997cm3, soil sample water content 16.7%, then soil sample dry density is 1.90 (take decimal 2) 8. soil composition of three substances: particles (solids), water (liquid), gas (gas phase) 9. what kind of soil does water exist in the earth, in three states: solid, liquid, gas 10. soils may be composed of phase bodies (two phase bodies and three phase bodies) 11. physical properties of soil: (1) dry density, natural density, saturated density, density of floating density (2) calculation of porosity 12. water content test, water content refers to what moisture, including soil particles outside the surface of water (including free water and bound water) Water content test method standard method for the determination of 13. soil dryin