3d打印启发下的模型实例化优化研究综述-计算机辅助设计与图形学.pdfVIP

第27 卷 第 6 期 计算机辅助设计与图形学学报 Vol. 27 No.6 2015 年6 月 Journal of Computer-Aided Design Computer Graphics Jun. 2015 3D 打印启发下的模型实例化优化研究综述 1, 2) 1)* 胡瑞珍 , 黄 惠 1) ( 中国科学院深圳先进技术研究院可视计算研究中心 深圳 518055) 2) (浙江大学数学系 杭州 310027) (hui.huang@) 摘 要: 3D 打印技术作为一种新型的快速成型技术, 为三维模型实例化制造带来了很大的便利, 同时也给数字几何 处理带来了新的挑战. 为了能够通过更加快速、廉价的方式打印出实现了某些特定功能的实例化模型, 分别从模型设 计和打印2 个阶段对3D 打印启发下的模型实例化优化研究进行概述. 希望能够使读者对这方面的研究热点以及进展 有基本了解, 并有所启发. 关键词：3D 打印; 模型实例化; 设计优化; 打印优化 中图法分类号：TP391 Recent Progress in 3D Printing Inspired Fabrication Optimization Hu Ruizhen1, 2) and Huang Hui1)* 1) (Visual Computing Research Center, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055) 2) (Department of Mathematics, Zhejiang University, Hangzhou 310027) Abstract: As a new way for rapid prototyping, 3D printing enables fabrication of custom objects with arbitrary geometry and also brings new challenges for digital geometry processing. To find a quicker and cheaper way of fabricating objects with some specific functions, vast research literature emerges. These works can be roughly classified based on the state they try to optimize, i.e., the model designing state and the printing state. This paper provides the readers a big picture on recent progress in 3D printing inspired fabrication optimization. We attempt to make it easier for new researchers to better explore and contribute to this topic. Key words: 3D printing; fabrication; design optimization; printing optimization 3D . 3D . , [2-3]. , 3D , (addi