大工14秋《工程力学(一)》在线作业3（Engineering mechanics work 14 autumn (a) online homework 3）.docVIP

大工14秋《工程力学(一)》在线作业3（Engineering mechanics work 14 autumn (a) online homework 3） Great works 14 autumn Engineering Mechanics (1) online homework 3 Single question judgment First, radio questions (10 questions, 60 points) 1. in the vicinity of the maximum bending moment of the straight beam, the dimension of the cross section is enlarged. A. is effective only in improving the strength of beams B. is effective only for increasing the stiffness of beams C. is effective in increasing the strength and stiffness of beams D. is ineffective in increasing the strength and stiffness of beams Developing options: C The 2. bridge is l long span concentrated force acting P, if the P changed the coverage of Q=P/l, it changes the maximum bending moment of beam and the maximum shear force is (). A. M decreases and V remains unchanged B. two are unchanged C. V decreases and M remains unchanged D. two decreases Developing options: A 3. in the bending and torsion deformations, the vector directions of the external torques are the axis of the rod respectively. A. vertical and parallel B. vertical and vertical C. parallel and vertical D. parallel and parallel Developing options: A 4., the cross section of a rectangular beam with a width equal to two times the width of the beam is subjected to plane bending under the action of load. If the vertical is replaced by flat and the other conditions remain unchanged, then the strength of the beam (...). A. increased to 2 times the original B. increased to 4 times the original C. is reduced to the original 1/2 D. is reduced to the original 1/4 Developing options: C 5. about the internal force change law of the beam, the following statement is correct. The cross section, shear force and bending moment values of the A. concentrated force are mutated The cross section of B. concentrated force has a sudden change in shear value, and there is no sudden change in the bending moment The cross section, shear force and bending moment values of the external