打印机共享（Printer sharing）.doc

打印机共享（Printer sharing） In7 permissions and shared settings Jurisdiction 1. C right property safe full control 2.UAC set to minimum Share The eight step is to connect Windows7 and XP in LAN From the home computer Author: rivers water Step 1: setting network card parameters Go to the control panel, select view network status and tasks, select change adapter settings, and enter the local network settings. Right click on the local connection that you use, select properties, and double-click the Internet protocol version 4 in the pop-up interface to enter the network parameter settings. Set NIC parameters The second step: open the Win7 share settings In the open network and sharing center interface, click the change advanced sharing settings on the left, and then open the advanced shared settings window, Set up network discovery, file and printer sharing, public folder sharing to enable, close password protection sharing, and when settings are complete, click save changes. Change file sharing settings The third step: setting up the Win7 Workgroup Right click on the computer, select properties, select advanced system settings on the left, the switch in the pop-up window to the computer, click change, and then in the pop-up working group option will be 2 computers set to the same working group. Set up workgroup The fourth step: open the Win7 folder sharing function Right click the folder that you want to share, select properties, select share, and then click the advanced share below. Select this folder in the pop-up window. Set folder share The fifth step: close the Win7 firewall Firewalls can cause LAN files to be inaccessible. Go to the network and sharing center, click Windows firewall, and in the open Windows firewall window, click open or close the Windows firewall command, In the open window, select the close Windows firewall option, and click OK to save. Close firewall The sixth step: enable the Win7 folder sharing rule The firewall is closed, in the firewall inte