杂牌机总线进入大全（A bus into the Guinness）.docVIP

杂牌机总线进入大全（A bus into the Guinness） A bus into the Guinness 1) 29 inch TV Hodge motherboard CPU:M37220M3-010SP: M52340sp. remote control decoding Press the menu key for 8018001, and then press 6.4.8.3 2) Hodge machine 863528B, 52K7 press the menu button 5 times in the program exchange input 2483 3) a 19 inch machine, LA76818A, LC863524B-53P4, 24C08, press Recall button, hold down the volume reduction button on the panel, and then press the remote control recall Once the process is repeated, the white balance is adjusted, and then the menu is repeated Adjustment state. 4) LC863320 5R19 enters the adjustment method. Enter the I2C method: press the screen button to appear once a screen, Press the three mute button to enter. 5) Hodge assembly machine, SANYO movement. The micro block model is LC863532-5z00, open the remote control and find it inside Just press the button 17 inch brand-name machine CPU is minus LC863328A5Y29 to zero does not let go by the main TV panel volume. Then continuous Just press [0] three on the remote control 6) LA863328A 5Y2814 inch, how to enter the bus, press and hold the panel volume, reduce the key to 0, and do not let go, then press the remote control The 0 key on the three time 7) m37160m8-053fp m61264 bus access method Press the menu, and then press V+ to select the dial menu, then press the channel select fine tune, press V+, press number 0-9. 8) LC863328A (5y29 -5y19-3022) 24C08LA76810A Hodge notes by remote control and reduction 000 enter 9) Hodge machine is LA863328A 5028 2MD0 Open the bus by removing the dark key that is not used in the remote control. 10) CPU is LC863324A 5T51, and I use the remote control to enter 6483 under the program status of this machine, Again, in the program exchange state, use the remote controller to enter 6483, then repeat and enter Other debug mode color factory word, 11) CPUM37220M3-167SP press the MENU button to appear full auto tuning menu, then press The number 6483 appears on the screen FACTORY (fact