大理石（Marble）.doc

大理石（Marble） Marble is a high-grade decorative materials, must be careful when buying, so as not to waste money. Identification of marble appearance quality from the following items from hand. (1) determine the color of the pattern, in the light of sufficient conditions, will have selected plates and the same batch of other optional marble plates at the same time on the ground, standing at a distance of 1.5m of them carefully observed. Requirements of the same batch of marble plate pattern, tone should be basically reconcile. (2) check the surface defects in light of the conditions, the sheet is flat on the ground, standing in the distance on the marble purlin invisible defect that there is no defect; standing in the distance can be seen and defects in the sheet purlin purlin not obvious without obvious defects; defects in the plate from the station at the purlin evident that defects. The observation of sheet defects exist on the surface of plate warpage; no cracks, blisters, spots, stains and sag phenomenon of harmonia. Determine if the above defects without sheet of high quality products, at the same time, front plate no missing edge off angle defect; if the defect is not obvious and there is no obvious missing edge off angle, it can be identified the sheet as a product; if there is that several defects but does not affect the use, and the front plate only 1, not more than 8mm, the width is not more than 3mm or missing edge length and width is less than 3mm off angle, you can determine the plate for qualified products. The plate in the transportation, loading and unloading process and damaged, can be bonded (for rupture or repair (plate) for edge defects, surface potholes or pits). However, there is no obvious mark on the front surface after bonding and the color should be close to the front color. (3) check mark marble marker order: naming, classification, size, grade, standard naming order: marble blocks origin names, names, color characteristics of marble (known