桥梁施工方法（Bridge construction method）.doc

桥梁施工方法（Bridge construction method） .txt bridge construction methods you can not make everyone satisfied, because not all people are people, successful people are in a way cattle B, road erection do you think I will watch you die? I will close the eyes of a simple supported beam bridge construction method 1, stent casting The following processes are included: (1) inspection before pouring. Include: 1, support and template inspection; 2, steel and cable location inspection; 3, pouring concrete preparation. (2) concrete pouring. Including: 1, determine the concrete pouring speed; 2, determine the concrete pouring sequence. There are several casting methods: 1, the level of layered casting: in a span of the whole layer of pouring, in mid span closed. Suitable for simply supported beam bridge with small span; 2, inclined layer casting: concrete from the ends of the main beam with oblique layer to the middle of the casting, in the middle of the closure; 3 unit casting method: when the width of the bridge is wider and the amount of concrete is larger, it can be divided into a number of vertical and horizontal units. 2, prefabricated installation (1) lifting frame, try (2) try to build the bridge frame Generally used in the long river, the road adopts the Bailey beam component assembled into bridge erecting machine; the railway adopts 800KN, 1300kn, 1600kn bridge erecting machine. (3) support frame beam method (4) combination of simple machines and tools (5) erection of tower Two, cantilever beam, continuous beam and rigid frame bridge construction method 1, the use of scaffolding construction (1) full story support; (2) mobile support; 2, prefabricated erection method (1) the whole construction of the girder section (2) cantilever erection method 3 cantilever method Cantilever construction method, also known as sectional construction method, is a method of construction with the pier as the center and the symmetrical cantilever of the two sides of the bridge. There are two