安装施工工艺（Installation construction technology）.doc

安装施工工艺（Installation construction technology） 1 range The process standard is applicable to the manufacture and installation of resistance, resistance and resonance silencers. 2 construction preparation 2.1 material requirements and main equipment: 2.1.1 all kinds of sheet metal and section steel shall have certificate of ex factory or quality identification document. 2.1.2 in addition to the above supporting documents, visual inspection shall be carried out. The plate surface should be smooth, uniform thickness, no obvious concave and broken phenomenon, and there shall be no crack, delamination, pitting and corrosion. The steel should be, should not have cracks, scratches, pits and other defects affect the quality. 2.1.3 sound-absorbing materials should be selected according to the design requirements strictly, and meet the requirements of fire resistance, moisture resistance and corrosion resistance. 2.1.4 other materials can not cause the reduction of the strength of the finished products due to defects or affect their use effect. Longmen 2.1.5 cutting machine, vibration curve cutting machine, manual electric cutting, chamfering machine, machine, machine of bite bite, compaction machine, sewing machine, steel cutting machine, punching machine, bench drill, electric drill, hydraulic riveting pliers, electric riveter, air compressor, spray gun, steel ruler, paint square, protractor, compasses, stylus, Yang Chong, hammer, hammer, closed, pulley, chain, rope, adjustable wrench, pliers, screwdriver, hacksaw, hammer, steel tape, line level etc.. 2.2 operating conditions: 2.2.1 shall be spacious, bright, flat and clean. 2.2.2 site should meet the requirements of processing machinery, facilities, power supply, safety protection devices and fire protection equipment. 2.2.3 mufflers shall be manufactured in accordance with the requirements of the design drawings and standard drawings, and shall be provided with the quality, technical and safety disclosure given by the build