天涯他（Tianya）.doc

天涯他（Tianya） Part 1: electrical safety management, safety inspection of power line in power plant, power line is an important part of power system, and it is an important task of power transmission. However, in some factories, the security inspection and operation maintenance of power lines are often not enough, which leads to the decrease of the safety of power lines in individual sections and the possibility of electrical accidents. Therefore, it is necessary to strengthen the safety inspection of the power line of the factory. (1) the overhead line inspection shall be carried out on the overhead lines in the factory area, and 1 security inspections are required on a monthly basis. In case of strong wind, heavy rain and other special conditions, there will be a temporary increase in the number of security checks. The following items shall be checked for the safety inspection of overhead lines: 1. Whether the pole is inclined, deformed, decayed, damaged or sinking. 2, along the line of the ground is stacked, flammable, explosive and strong corrosive substances. 3, along the line, there are dangerous buildings?. It should be possible to ensure that these buildings do not cause damage to the line during the thunderstorm and windy seasons. 4, there are no branches, kites and other sundry hanging on the line?. 5 、 whether the cable and the sheet pile are in good condition, whether the binding line is firm and reliable. 6. Whether the joint of the wire is in good contact, whether there is overheating, redness, serious aging, corrosion or broken off; whether the insulator is stained or discharged. 7, lightning grounding device is good, the grounding wire has no rust case. Before the thunderstorm season comes, it should be checked. (two), the security check cable line cable is laid in the ground, safe operation and inspection work to do a good job of the cable, it is necessary to fully understand the way of laying cables, structural layout, line direction and cable head po