工程量清单计价表（List of bills of quantities）.doc

工程量清单计价表（List of bills of quantities） Annex 1: work Cheng amount clear single meter price surface Statement of use of bill of quantities 1. The bill of quantities shall be composed of the following contents 1, cover: seal -1, 2, 3, 4 2, general description: table -01 3, project budget control price (minimum bid) total price list: table -02 4, project bidding total price list: table -03 5, the completion of the project settlement total price list: table -04 6. Summary of individual project cost: table -05 7. Summary of unit project cost: table -06 8, sub item volume list and valuation table: table -07 9, list of measures items and price list: table -08 10, other items list and valuation form: table -09 11. List of material acquisition fees of tenderee: table -10 12, sporadic work list and valuation form: table -11 13, list of fees and valuation form: table -12 14, visa and claims valuation table: table -13 15, sub item volume list comprehensive unit price analysis table: table -14 16, list of measures items (two) comprehensive unit price analysis table: table -15 17. Main material price list: table -16 18, random review of the materials and price list: table -17 Two. The preparation of the bill of quantities shall conform to the following provisions 1, the preparation of the list of quantities, use forms include: seal -1, table -01, 07, 08, 09, 10, 11, 12, and 17. 2. The bill of quantities shall be compiled by the tenderee or the project cost consulting unit entrusted by the tenderee. 3. The cover shall be filled out, signed and sealed according to the prescribed contents. 4. The general instructions should be filled out as follows (1) general situation of the project: construction scale, engineering characteristics, duration of the project, actual situation of the construction site, physical and geographical conditions, environmental protection requirements, etc.. (2) bidding and subcontracting of the project. (3) the basis for compiling bill of quantities. (4) spec