快速成型分类（Rapid prototyping classification）.doc

快速成型分类（Rapid prototyping classification） Rapid prototyping technology can be divided into two categories according to the molding method: the forming technology of laser and other light source based on (LaserTechnology), for example: stereolithography (SLA), laminated object manufacturing (LOM), selective laser sintering (SLS), Shape Deposition Manufacturing (SDM); injection molding technology based on JettingTechnoloy (for example:), fused deposition modeling (FDM), three dimensional printing (3DP), multiphase spray deposition (MJD). Here is a brief introduction to the more mature process. The SLA technique is based on the photopolymerization principle of liquid photosensitive resins. When the liquid material is irradiated by ultraviolet light with a certain wavelength and intensity, the photopolymerization can happen rapidly, and the molecular weight increases rapidly, and the material changes from liquid to solid. The working principle of SLA: tank filled with liquid photocurable resin under the action of laser beam in the mirror, in the liquid surface scanning, track and beam scanning are all controlled by computer, hit the spot where the liquid curing. At the beginning of forming, the working platform is at a certain depth below the liquid level. The spot is scanned on the surface of the liquid according to the instruction of the computer, that is, point by point solidification. When a layer of scanning is complete, the place that is not irradiated is still liquid resin. Then the lifting platform drives down a platform height, has formed culture and covered with a layer of resin, the viscosity of the liquid resin scraper will be scraped, and then the next layer scanning, a layer of new week week before a prison sticky layer, so repeated until the entire manufacturing finished parts and get a 3D model. SLA method is the most researched method in the field of RP technology, and it is also the most mature method in technology. SLA molding parts of higher precision