条形盒-设计说明书.docVIP

单位代码 02 学 号 080118020 分 类 号 TH6 密 级 毕业设计说明书 条形盒体塑件造型及其注射模具设计 院（系）名称 工学院机械系 专 业 名 称 材料成型及控制工程 学 生 姓 名 指 导 教 师 2012年 05 月 08 日 条形盒体塑件造型及其注射模具设计 摘 要 本文基于条形盒塑件的结构及成型工艺进行了注塑模具设计，该条形盒塑件采用ABS（丙烯晴-丁二烯-苯乙烯)材料制成，是工业中常见的一种保护盖产品。通过对塑件进行结构工艺分析及比较，进而设计出了一副注塑模。本文从产品结构工艺性和具体模具结构出发，对模具的浇注系统、型腔结构、抽芯机构、脱模机构、顶出系统、冷却系统等做了详细的设计，对注塑机和注射工艺的有关参数进行了校核并选择了注塑机，同时编制了模具的加工工艺及试模程序。在对该条形盒塑件的具体结构进行分析的基础上，该模具采用轮辐式浇口的单分型面注射模具。结果表明该模具能较好的满足此塑件的成型技术要求。 关键词: 注塑模，条形盒，抽芯机构，注射工艺，脱模机构 Line box body plastics injection mold design and modelling Author:Chen Caiyun Tutor:Liu Wanfu Abstract Based on the structure of the plastic parts bar box and molding process injection mold design,this bar box of plastic parts adopt ABS (propylene sunny butadiene styrene- ) materials,is common in industry of a protective cover products. Through to the plastic parts for structure and comparative analysis of the technology, and design a pair of injection mold. This from the product structure and the specific property of the mould structure, mould pouring system, cavity structure, core-pulling mechanism, demoulding mechanism and ejector system, cooling system, detailed design, the plastic injection machine and the injection process of the relevant parameters for the checking and choose the plastic injection machine, and compiled the mould processing technology and the testing purpose program. To this bar box in the structure of plastic parts on the basis of the analysis of the mould adopts the spokes gate single injection mold parting surface. Results show that the mold can better satisfy the plastic parts molding technology requirements. Key words：Injection mold, Compasses box, Corepulling mechanism, Injection technology, Demoulding mechanism 目 录 1 绪 论 1 2 塑件的工艺性分析 2 2.1 塑件的原材料分析 3 2.2 塑件的结构工艺性分析 4 2.3 塑件