juniper ssg防火墙无法通过web或telnet登陆解决办法（The juniper SSG firewall cannot log in via web or telnet）.doc

juniper ssg防火墙无法通过web或telnet登陆解决办法（The juniper SSG firewall cannot log in via web or telnet） Some users react to the fact that the Juniper SSG firewall cannot log in through web or Telnet, so heres a simple analysis. 1, check whether the equipment is switched on. If the Juniper SSG firewall doesnt boot, you wont even be able to connect with it. 2, whether the crash phenomenon, of course, this situation is very small, the Juniper SSG firewall device is very stable, long time boot is not crash, if the crash phenomenon, restart it. 3, the network connection is normal. Whether the cable loose or the bad quality of the network cable. Take a look at the interface lights are normal, and the network card lights are the same, a lamp evergreen, one flashing, indicating data transmission. 4, through the external network IP can not login, to check whether the external network connection is normal, ADSL whether normal connection, if the ADSL fails, need to contact the line provider to provide support. 5, both inside and outside the network are normal, and can be Ping through device. It may be the Juniper SSG firewall interface WEBUI and telnet management function is not available, the default trust port is open, need to set the untrust port opened, if the trust WEBUI and the telnet management functions are closed, you need to set the fire wall opening through the console port. Juniper SSG firewall will bring a console first, one is RJ45 header connected to the firewalls console port, and the other end of the COM interface is connected to the notebook or desktop serial port, using the super terminal to connect the firewall. SSG140- get int (see interface) A - Active, I - Inactive, U - Up, D - Down, R - Ready Interfaces in vsys Root: Name, IP, Address, Zone, MAC, VLAN, State, VSD Eth0/0, 192.168.1.1/24, Trust, 001d.b50c.6480 - U - Eth0/1, 0.0.0.0/0, DMZ, 001d.b50c.6485 - D - Eth0/2, 116.228.xx.xx/30, Untrust, 001d.b50c.6486 - U - Eth0/3, 0.0.0.0/0, Null, 001d.b50c.6487 - D - Eth0/