pc 聚碳酸酯（PC聚碳酸酯）.doc

pc 聚碳酸酯（PC聚碳酸酯） PC polycarbonate.Txt liar too much, fool obviously not enough. I was in charge of kiss your princess in the way to kill Longyou Zhanji River and climbing to the top of the tower. #7 polycarbonate (PC) is introduced PC polycarbonate Chemical and physical properties PC is a non crystalline engineering material with excellent impact strength, thermal stability, gloss, inhibition of bacterial characteristics, flame retardancy, and resistance to contamination. PC gap, Izod impact strength (otched Izod impact stregth) is very high, and the shrinkage rate is very low, generally 0.1%~0.2%. PC has good mechanical properties, but its flow characteristics are poor. Therefore, the injection molding process of this material is difficult. When choosing the quality of PC material, the final expectation of the product should be taken as the benchmark. If plastic parts require high impact resistance, use low flow PC materials; conversely, high flow PC materials can be used to optimize the injection process. Injection molding process condition Drying treatment: PC material has moisture absorption, drying before processing is very important. Recommended drying conditions are 100C to 200C, 3~4 hours. The humidity must be less than 0.02% before processing. Melting temperature: 260~340C. Mold temperature: 70~120C. Injection pressure: use high injection pressure as much as possible. Injection speed: low speed injection for smaller gate, high speed injection for other types of gate. Typical use Electrical and commercial equipment (computer components, connectors, etc.), appliances (food processing machines, refrigerators, drawers, etc.), transportation industry (front and rear lights, instrument panels, etc.). Polycarbonate is a molecular chain containing [O-R-O-CO] chain thermoplastic resin according to the molecular structure of the ester can be divided into aliphatic, alicyclic and aromatic type of fat, which has the practical value of the aromatic polycarbonate, and bis