pcb工程师分级依据（PCB engineer grading basis）.doc

pcb工程师分级依据（PCB engineer grading basis） PCB engineer grading basis Position: junior level PCB Engineer For improving the ability of: AP 1, can make a simple package, such as DIP10 wait; AP 2, master the basic operation of at least one kind of PCB design software, and can make simple wiring width and spacing rules; AP 3, can be more reasonable and orderly layout and wiring of with 100 elements and 200 network or below PCB; AP 4, manual in others or self rule or automatic routing and modify, reached 100% and DRC by routing; Which was 5, with mechanical structure and thermal design basic knowledge; AP 6, master some basic requirements of double plate alignment. Improving the work content: Design and modification of the brand, 1 simple PCB (such as the simple structure of the front panel, small single board); AP 2, specified in the PCB part of the complex line; Which was 3, and their own design PCB related debugging; AP 4, write related development, debug log. The brand of PCB in their job duties: responsible for design. The brand position: PCB Engineer For improving the ability of: AP 1, according to the manual and real fabrication of complex packages, such as RJ-45 with lamp base, and ensure the appearance, pad size completely correct (according to the actual measurement at least can be inserted); AP 2, is familiar with at least one PCB design software and can independently or make routing rules in detail under the guidance of; The layout and wiring of the brand to 3, with 400 elements and 1000 network or following single and double-sided and multilayer PCB is reasonable and orderly, in the layout process always considering thermal design, structure design, electromagnetic compatibility design, appearance and other aspects of the request, unsure of myself in a timely manner to the more senior PCB engineer consult or discuss; AP 4, in others or self rule under the skilled manual or automatic wiring and modify, reached 100% completion and DRC completely through the bottl