双转子连续混炼机非等温混合过程的数值模拟研究.pdfVIP

第1期 机械设计与制造 2008年 1月 Machinery Design ＆ Manufacture 一1一 文章编号：11301—3997(2008)01-0001—03 双转子连续混炼机非 等温混合过程的数值模拟研究 曹文凤t 谢林生 缪国兵 5,1晓呜 计 (·江苏工业学院，常州213016)( 华东理工大学，上海200237) 转专 Numerical simulative Investigation of nonisothermal mixing of two-rotor continuous mixer CAO Wen—feng1,XIE Lin-sheng2，MIAO Guo-bing1,LIU Xiao—min 哪 ‘ 、 ( Jiangsu Polytechnic University，Changzhou 213016，China) (2 East China University of Science and Technology，Shanghai 200237，China) 【摘 要】利用PRO／E软件建立了双转子连续混炼机混炼段的三维几何模型，并应用FLUENT 有限元软件对高聚物熔体在SCM50双转子连续混炼机混炼段中的流动和混合过程进行了三维非等 温流场分析，给出了双转子速度场和剪应力场的基本规律。计算结果表明：螺棱顶部具有较大的剪应 力和速度梯度，返混螺棱区存在回流现象。所得结论可为双转子连续混炼机的数值模拟研究提供一定 的方法指导，并为其工程实践提供一定的理论指导。 关键词：双转子连续混炼机；混炼段；混合模拟；FLUENT 【Abstract】A three-dimensional model on mixing section oftwo-rotor continuous mixer was built by PRO／E，and the three-dimensional flow field analysis of mixing section of two—rotor continuous mixer— SCM50 was analyzed with FLUENT，and the laws ofvelocityfield and shearing stress field were given．The numerical resuhs showed that there were great gradients of shearing stress and velocity at the top of the screw，and the circumfluence existed in the returning screw region．The conclusions could offer some methodological guidance for numerical studies offlow in two—rotor continuous mixer,and could also be used as theoretical guidelinesfor engineeringpractices in two—rotor continuous mixer． Key words：Two-rotor continuous mixer；Mixing section；Mixing simulation；FLUENT 中图分类号：TH12，TP31 文献标识码：A 本文利用PRO／E软件建立了双转子连续混炼机混炼段的 (4)由于雷诺数较小，可认为熔体流动为层流流动； 三维几何模型，并应用FLUENT有限元软件对高聚物熔体在 (5)物料已经完全熔融，混炼室内