安装木地板准备（The installation of wooden floor ready）.doc

安装木地板准备（The installation of wooden floor ready） In the process of renovation, the wood floor is the last working procedure of hard decoration, so in the process of the construction to Full communication and decoration in the construction of the master, before and after some small requirement is to match the decoration master, can let wood The floor reflects the beautiful appearance and satisfactory complete acceptance. The first line is installed on the floor on the ground, the ground is most affected floors juegan. Therefore, the common ground in the installation process, the following conditions must be met, in order to achieve the quality requirements and ensure the use of the floor Install the appropriate environment. The cement floor should be no dust, looks relatively dry, moisture content should be less than 2% (a geothermal system should be not more than 1.5%), wood Soft ground should be 6%-10%; The ground with 2 meters must be horizontal radius range, height error of not more than 3 mm, more than the error part must use cement or Quick dry for leveling, after leveling the ground to meet the requirements; The casing of wires and pipes should be in the cement ground under 5 mm, less than the smoothness of cement ground The ground should be clean without debris; The cement floor should be no cracking and deformation phenomena; The second is on the level of the requirements of the door. On the floor in the installation of the door shut the general decoration In order to ensure the installation after the floor, the door can be free to open, the door and the floor surface distance of not less than the floor mats + +2 mm thickness There are wires and pipes at the door after should mark the location, to prevent nail damage The third is the height of the requirements for the installation of the anchor line. The anchor line heights and floor mats and the thickness of the anchor line installation position The anchor line nailing position of wires and pipes should be m