物流管理』[物流学堂]国际集装箱安全公约（Logistics management [school] International Convention for the safety of container logistics）.docVIP

物流管理』[物流学堂]国际集装箱安全公约（Logistics management [school] International Convention for the safety of container logistics） Logistics management [] the International Convention for the safety of the container logistics school (CSC) (map) access number: 3853 number of replies: 8 the landlord replies Author: Date: 2004-8-26 13:44:35: Euphorbia heterophylla [name] in Chapter States parties To realize in the container handling, storage and transportation process, requires a high degree of personal safety protection. Pay attention to the necessity of international container transportation convenience. That, on the one hand, is beneficial to develop common international safety requirements. That, for this purpose the best is the conclusion of a convention. Decided to formally put forward relevant container structure requirements, to ensure the normal operation in container loading and unloading, stacking and transportation safety. For this purpose, reached the following agreement: The first article of the Conventions general obligations The contracting parties to ensure the implementation of the provisions of the Convention and its annex, the annex shall be part of the convention can not be separated. Second definitions In this Convention, unless otherwise expressly stated: 1. container refers to a kind of transportation equipment: (1) has durability, so the corresponding strength enough to be suitable for repeated use; (2) is specially designed for easy transport in one or more modes of transport of goods, without reloading halfway: (3) for securing and (or) ease of handling, with corner fittings: (4) four points outside the closed area should be one of the following two: 1. At least 14 square meters (150 square feet), or As a vertex parts, at least 7 square meters (75 square feet); The word container does not include vehicles, not including packaging; however, the container in the chassis and chassis transportation, including. 2. corner fittings refers to loading and unloading,