网卡增益器（NIC gain）.docVIP

网卡增益器（NIC gain） Strengthen the improved wireless router or wireless antenna if a AP is not suitable for the installation of the antenna, so how can we increase the transmission distance and the efficiency of the wireless signal? Obviously, only to increase the gain of the antenna wireless network card. Here the author of USB wireless network card based on component, describe how to create a wireless network card antenna gain. Looking for material first look for some rules of metal utensils, so what do you think? You will soon think of home skillet, but an iron quality heavy and not suitable for fixed and installed, the appearance is not beautiful. Fortunately, our ancestors thousands of years ago as we invented the production gain of the antenna of a good thing colander (Figure 3), is not a little doubt immediately? Youll see. except it can be used to make dumplings and noodles, but also to gain antenna. Two, prepare for possible tools in the process of making tool with a handsaw, pointed pliers, rubber tube and USB connection line. A strainer is used to be sawed off or make it suitable length. Pointed pliers are used as colander rubber tube cut a suitable gap (Figure 4). The role of the rubber tube is based on the focus distance of USB joint is fixed in a colander; while the USB line is connected to the wireless network to connect with the computer. Of course, you still have to prepare a ruler, if necessary also need paper, pens and calculators to measure and calculate the focus position. Three, calculate the focal position determined focus position to determine the length of the rubber tube, rubber tube can be fixed and wireless network card. To calculate the focal distance of the center of the bottom of the colander (rubber tube placed) in length, should pay attention to consider the length of the USB card, because the antenna is built-in USB wireless card. Open USB wireless card, built-in antenna located on the left side of the white position. So as long as the