全数字开环光纤陀螺工作点实时控制 real-time control of the work point in all digital open-loop fog.pdfVIP

33 5 Vol.33, No.5 2006 5 Opto-Electronic Engineering May, 2006 文章编号 1003501X(2006 全数字开环光纤陀螺工作点实时控制 ( 国防科学技术大学 光电科学与工程学院 湖南 长沙 410073 ) 摘要 -3 4 1.16×10 3.1×10 4060 10s 关键词 中图分类号 V241.5 文献标识码 A Real-time control of the work point in all digital open-loop FOG SONG Zhang-qi YAO Qiong FAN Lei XIE Yuan-ping HU Yong-ming ( College of Opto-Electronic Science and Engineering, National University of Defense Technology, Changsha 410073, China ) Abstract The work point in a practical open loop Fiber Optic Gyroscope (FOG) must be controlled. A work point control method in all digital open-loop FOG is presented. According to the work point, gotten through the second and fourth harmonic components in open loop FOG signal, the control system adjust the amplitude of the modulation signal to control the work point without adding any hardware. The experimental results show the control method can stabilize the work point of open loop FOG in -3 -4 large temperature range. The control stability is 1.16 10 , bias is 3.1 10 and the start-up time is less than 10s from – 40 to 60 Key words Open-loop fiber a gyroscope; Work point; Real-time control 引 言 光纤陀螺是一种全固态的光学陀螺 具有可靠性高 动态范围大 启动时间短等优点 经过二十多年 的发展 在国外已经开始广泛应用[1,2] 低精度