金工复习（Metalworking review）.docVIP

金工复习（Metalworking review） A: to determine the problem 1 in order to improve the permeability of sand, sand in upper and lower box Zaton hole. (*) 2 when welding, the welding current is better (x) 3, the main angle is the angle between the main cutting edge and feed direction. (V) 4, rasps are suitable for processing soft copper metal materials; fine file suitable for machining steel and cast iron materials. (V) The 5. type is the parting surface (x) 6. planing processing, tool return processing. (V) 6. planing processing, tool return processing. (V) 7 main riser feeding effect, its position should be set at the highest point of casting. (*) 8 commonly used tool tool material is high speed steel and alloy steel. (V) 9 filing date of aluminum, copper and other soft materials with fine teeth file. (*) The main movement is the rotation of the workpiece 10. lathe. (V) 11. no AC welder is connected between the reverse connection. (V) 12, the most effective way to eliminate and improve the welding heat affected zone is performed after welding heat treatment. (*) 13, the evaluation method of metal material welding experiment method and carbon equivalent method. (V) 14 grinding, honing and superfinishing are finishing. (*) 15 normal when sawing, the saw blade should be carried out to improve the service life of the saw blade length. (V) 16 vertical plane, the cutter turntable position must be aligned with the zero line (V) 17 in the milling process, the workpiece movement, the milling cutter feed movement (x) 18 the workpiece in grinding motion motion, wheel rotation for feed motion. (*) 19 the ingate gating system is used to undertake liquid metal. (*) 20 grinding is actually an ultra high speed cutting edge cutting. (V) 21 in EDM machine for forming electrode machining hole electrode is not corroded. (*) 22 of the fault prevention of NC machining method is run. (V) 23 plane vertical plane should be used in partial knife. (V) 24 grinding grain number is smaller, said abrasi