effect of impulse noise on wireless relay channel脉冲噪声对无线中继信道的影响.pdfVIP

Wireless Sensor Network, 2012, 4, 167-172 /10.4236/wsn.2012.46024 Published Online June 2012 (http://www.SciRP.org/journal/wsn) Effect of Impulse Noise on Wireless Relay Channel Siamack Ghadimi, Jamil Hussian, Tarlochan S. Sidhu, Serguei Primak Department of Electrical and Computer Engineering, The University of Western Ontario, London, Canada Email: {sghadim, hjamil2, slprimak}@uwo.ca, sidhu@eng.uwo.ca Received March 1, 2012; revised May 10, 2012; accepted May 29, 2012 ABSTRACT Relay Network is most suited wireless communication technique for future Smart Grid, because it has a lot of advan- tages such as reliability against failures and offers redundancy, self-configuring and self-healing. For example if one nod or path is blocked, it can find a neighbour node, by different algorithms schemes. The purpose of this paper is to simulate wireless relay channel model in presence of impulse noise and computing the BER performance of channel data. It makes to be useful for a designer to predicting error and behaviour of a channel for optimum design, to be able choose a robust channel. Keywords: Impulse Noise; Smart Grid; Grid Line Communication; Co-Operative Communication 1. Introduction 108 to 1011 Hz i.e., 100 MHz to 100 GHz. The minimum noise is given by solid curves, while some other noises of Impulse noise is a noise which often generates in power interest are given by dashed curves [8]. line and can be a source of error in transmission of data Future of Smart Grid will be based on intelligence, in a channel and it is a majo