analysis of a reflectarray by using an iterative domain decomposition technique分析reflectarray通过使用一个迭代域分解技术.pdfVIP

Hindawi Publishing Corporation International Journal of Antennas and Propagation Volume 2012, Article ID 139146, 8 pages doi:10.1155/2012/139146 Research Article Analysis of a Reflectarray by Using an Iterative Domain Decomposition Technique ´ Carlos Delgado, Josefa Gomez, Abdelhamid Tayebi, ´ ´ ´ Ivan Gonzalez, and Felipe Catedra Computer Science Department, University of Alcala, 28871 Madrid, Spain ´ Correspondence should be addressed to Carlos Delgado, carlos.delgado@uah.es Received 3 March 2012; Revised 17 May 2012; Accepted 23 May 2012 Academic Editor: Manuel Arrebola Copyright © 2012 Carlos Delgado et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. We present an efficient method for the analysis of different objects that may contain a complex feeding system and a reflector structure. The approach is based on a domain decomposition technique that divides the geometry into several parts to minimize the vast computational resources required when applying a full wave method. This technique is also parallelized by using the Message Passing Interface to minimize the memory and time requirements of the simulation. A reflectarray analysis serves as an example of the proposed approach. 1. Introduction [2–6]. Fast matrix compression and low-rank approximation approaches can also be mentioned as efficient methods in In th