assessment of electrical influence of multiple piezoelectric transducers connection on actual satellite vibration suppression评估电气影响多个压电传感器的连接在实际卫星振动抑制.pdfVIP

Hindawi Publishing Corporation Smart Materials Research Volume 2011, Article ID 686289, 8 pages doi:10.1155/2011/686289 Research Article Assessment of Electrical Influence of Multiple Piezoelectric Transducers’ Connection on Actual Satellite Vibration Suppression Shigeru Shimose,1 Kanjuro Makihara,2 Kenji Minesugi,1 and Junjiro Onoda1 1 Institute of Space and Astronautical Science (ISAS), Japan Aerospace Exploration Agency (JAXA), 3-1-1 Yoshinodai, Chuo-Ward, Sagamihara, Kanagawa, 252-5210, Japan 2 Department of Aerospace Engineering, Tohoku University, 6-6-01 Aoba, Aramaki, Aoba-Ward, Sendai 980-8579, Japan Correspondence should be addressed to Shigeru Shimose, shimose.shigeru@jaxa.jp Received 6 September 2010; Accepted 9 March 2011 Academic Editor: Osama J. Aldraihem Copyright © 2011 Shigeru Shimose et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. We conduct comprehensive investigation of a semiactive vibration suppression method using piezoelectric transducers attached to structures. In our system, piezoelectric transducers are connected to an electric circuit composed of the diodes, an inductance, and a selective switch. Our method (SSDI) makes better use of counterelectromotive force to suppress the vibration, instead of simple dissipation of vibration energy. We use an actual artificial satellite to verify their high performance compared to conventional semi-active methods. As a consequence, we demonstrate that our semi-active switching method can suppress the vibration of the real artificial satellite to as much as 50% amplitude reduction. In our experiment, we