WinDriver基于PCIE的数据存储卡开发+文献综述.docVIP

WinDriver基于PCIE的数据存储卡开发+文献综述 摘要随着高速采集系统、图像采集系统等测试系统的发展，在测试中产生的大容量数据如何快速传入计算机进行分析处理成为制约系统性能进一步提高及系统功能实现的一个重要环节。在此背景下，通过研制以DDS产生数据并通过PCI Express计算机总线将数据传入计算机的传输卡，实现将外部数据高速传入计算机。 论文在分析任务及技术指标的基础上，设计了系统总体方案。在硬件实现部分，介绍了基于PCI Express总线高速传输过程中的相关技术，对FPGA实现PCI Express总线接口、FPGA实现DMA传输、FPGA进行中断管理等技术进行了详细的讨论；在软件部分，结合系统读取数据过程讨论了利用WinDriver开发设备驱动，并且对驱动程序与应用程序的开发步骤进行了详细的论述。系统的调试与测试验证了基于PCI Express X1接口的传输卡数据传输的可行性和正确性。8405 关键词PCI ExpressFPGAIP核WinDriver 毕业设计说明书（论文）外文摘要 TitleDevelopment of data storage card based on PCI Express Abstract Along with the development of test systems such as high-speed integrated system，image collection and so on，how to transfer a large amount of data produced in testing process to analyze and process them becomes the key problem that restricts system performance improvement and system function achievement. With this background, high-speed transmission of exterior data into computer is realized by using DDS to generate data and transferring the data into computer through PCI Express computer bus. The general plan of system is designed in this paper on the basis of analyzing task and technical indexes. Correlative techniques in the process of high speed data transmission based on PCI Express bus is introduced in the hardware part. Many technologies such as FPGA achieving PCI Express bus, FPGA achieving DMA transmission, FPGA performing intermitting management and so on are discussed in detail. In software part, using WinDriver to develop device driver are introduced combining the process of reading the data by system, and the steps of develop drivers and applications are discussed in detail. The debugging and testing of the system verify the feasibility and correctness of data transmission based on PCI Express X1 interface. 3.6本章小结19 4驱动程序设计19 4.1引言19 4.2利用WinDriver开发设备驱动19 4.2.1开发工具的选择19 4.2.2WinDriver工作原理20 4.3驱动程序与应用程序的开发20 4.3.1生成INF文件和用户函数21 4.3.2安装设备驱动23 4.3.3应用程序的开发24 4.4本章小结27 5系统调试及结果分析27 5.1调试环境27 5.1.1硬件系统27 5.1.2设计软件28 5.1.3本章内容28 5