分析空气压缩机温度高的原因（Analyze the cause of high temperature of air compressor）.docVIP

分析空气压缩机温度高的原因（Analyze the cause of high temperature of air compressor） Air compressor for mechanical transmission, high-speed operation of the equipment without proper lubrication and cooling will produce high temperature, and high temperature will make the Department of physics of rotor and bearing material numerical changes, serious causes the entire host aside, although the air compressor factory are added on the high temperature protection device, but the fault the existence of the protection device will make frequent moves, affect the normal production of customers. The number of air compressor caused by high temperature, if the root of fault finding blind not only benefit is low, the waste of manpower and material resources, more important is to give customers with professional impression, or even lose the chance to cooperate next time. Experts on the fault for many years of research and exploration, after many on-site operations, is now integrated with a set of fuel injection screw air compressor rapid search for high-temperature failure source method, for your reference: We first to screw air compressor temperature to make an understanding: usually injection screw machine should work at 65~98 degrees is appropriate, the oil temperature is too low will affect the decomposition of oil and water, resulting in oil emulsion, reducing the life of lubricating oil; and high temperature will reduce the gas transmission coefficient and increase power consumption, oil viscosity that will be reduced, resulting in abnormal friction loss of bearings, bearing beads and even accidents, the temperature is too high will make the oil thermal decomposition in the metal catalyzed formation of harmful free carbon, acids and water (carbon), which will make the screw clamping. Oil circulation process can be understood as two parts, namely the nose to the oil and gas separation tank to the oil and gas separator to the one-way valve to the head; and the other circuit can be divided i