基于MSP430的RFID试验系统的设计-德州仪器在线技术支持社区.PDF

:TP331 :A : 1009- 2552(2008) 11- 0022- 04 MSP430 RFID 谢 宏, 肖承勇 ( , 200135) : 针对当前RFID技术的高速发展需要, 面对RFID 技术的研究及其现有的RFID 的实验设 备的需求, 很多高校尚未配备 频实验室和 频实验系统, 文中提出了基于MSP430 系列单片机 的 频识别系统的硬件设计方案, 通过SPI 接口实现系统单片机与自动识别部分的通信和对 频 芯片的工作模式控制, 设计了MSP430 系统中电源模块复位电路模块晶振电路模块JTAG 接口模块串口通讯模块 频模块等模块的电路原理图, 并介绍了各部分的功能该系统可以 进行功能演示在线下载仿真和调试, 经实验证明原理正确可靠, 可以广泛应用于教学实 验科研和电子设计等领域 : ; ; MSP430 Design of RFID experimental system based on MSP430 XIE Hong, XIA Chengyong ( Institute of Information Engineering, Shanghai Maritime University, Shanghai 200135, China) Abstra t: In view of the current rapid development of RFID technology, in the face of RFID technology research and its existing RFID experimental equipment requirements, many colleges and universities have not equipped with RF laboratory or RF experimental system. A method based on the MSP430 series MCU of radio frequency identification system hardware design is proposed. The communications in the automatic identification system betweenMCU part and RF chip andmodes control arefulfilledthrough SPI interface. The method designs the MSP430MCU power module, reset circuit module, crystal circuit module, JTAG interface module, serial communication module and RF module circuit schematics, and on thepart of thefunction. The system can function demo, online downloads, simulation and debugging. The principle of the method is accurate and reliable by the test, which can bewidely used in teaching, laboratory, research and electronic design, and other fields. Key words: laboratory system; RFID technology; MSP430 0 引言 , , ( ) ,, , ,