传真机设置（Fax settings）.doc

传真机设置（Fax settings） The fax machine is the receive mode. Press the receive mode button to select TEL, which is the phone mode. You must manually send the signal. FAX is the fax mode, and the signal is automatically sent after a few rings. Or ANS/FAX is automatic identification, if the other party gave the fax signal, the opportunity to automatically identify the corresponding fax signal. Four fax receive modes are summarized. There are four types of fax modes: Fax, Tel, FaxTel, Answering, Machine. Please according to your work needs to choose different periods to set different modes: Fax mode: automatically receive fax mode. When you want an all-in-one machine to be used as an ordinary fax machine for a certain period of time, you can rest assured of setting up the FAX mode without having to answer any calls. (FAX means Fax) Tel mode: manual receive fax mode. Some families or small businesses have only one telephone line in their room, which is a telephone number. At this point, you can set the all-in-one as Tel mode. When the phone comes in, the whole machine does not automatically give the fax signal, only will continue to ring, until there is a person to answer the phone, and found that the other party is to send their own faxes, and then manually give the other party fax signal. The advantage of this model is that only a telephone line can be used to make calls and faxes without delay. The limitation is that personnel must be involved. (Tel means telephone) FaxTel mode: fax telephone intelligent identification mode. A facsimile method that manually accepts faxes and automatically accepts the truth. To set this mode, one chance automatically identifies whether the caller is calling by fax or by voice. More suitable for busy office workers, desktop, desktop use. Answering Machine mode: when there is an answering machine or a recording telephone on the 2 mouth of the all-in-one, please set this mode to avoid the interruption of the message process by fax tone. Set