电厂知识（Power plant knowledge）.docVIP

电厂知识（Power plant knowledge） Power plant instrumentation knowledge 2010-06-03 22:10:32| classification: basic knowledge of | instrument Tags: | name and subscription. I. Basic Knowledge 1. What is measurement? Answer: measurement is the process of comparing the known standard quantity to the unknown physical quantity. 2. How are measurements classified? Answer: according to the form can be divided into direct measurement, indirect measurement and combination measurement 3. What is the measurement error? Answer: in any measurement process, the measurement method is not perfect, measuring equipment, measuring environment and observation will inevitably cause a certain error, and the measurement results are distorted, the measurement results and the measured difference exists between the true value, the difference is the measurement error. 4, what are the methods of calibration? Answer: 1, indicating value comparison law, 2 standard material law 5, what are the three delivery modes of heat? Answer: conduction, convection, radiation 6, the output characteristics of the transistor is divided into which three regions? Answer: cut-off zone, amplification zone, saturation zone 7 what parts does the actuator consist of? A: the actuator consists of the actuating mechanism and the regulating valve. 8, what is called PID regulation? Answer: PID regulation means adjusting the instrument with the functions of ratio (P), integral (I) and differential (D) action. 9, what are the parts of the moving coil temperature instrument? Answer: indication adjustment type includes three parts: moving coil measuring mechanism, measuring circuit and electronic regulating circuit. The indicating type has two parts: a moving coil measuring mechanism and a measuring circuit. 10, what is called sensitivity? Answer: sensitivity is the instruments ability to respond to measured objects. It reflects the sensitivity of the instrument to the variation of the parameters to be measured. 11, what is the ele