烧机油基本情况判断危害说明和原因剖析——山东万通汽修学校（Basic judgement of fuel oil, hazard description and cause analysis -- Shandong Wantong Auto repair school）.docVIP

烧机油基本情况判断危害说明和原因剖析——山东万通汽修学校（Basic judgement of fuel oil, hazard description and cause analysis -- Shandong Wantong Auto repair school） According to a survey, heavy oil consumption has become one of the biggest complaints for car owners. Burning oil, which seems to us the only problem of old vehicles, has spread to many new cars and quasi new cars. Although the oil consumption problems, far from the fuel consumption, so that people pay attention to, but the price of oil is more expensive, and secondly, excessive consumption of oil will always lead to a faulty lenovo. So, about the problem of burning oil, its time to get to know. What is burning oil? We must first determine one thing, that is, a better condition of the car, in normal use will also be the loss of oil. While the cause of loss of oil, mainly in the following: 1, when the engine is running, the inner wall of the cylinder will be accompanied by a layer of oil film to reduce friction, but in the combustion process of mixed gas, this gas will be part of the oil film and the high temperature combustion combustion together, resulting in loss of. 2, in addition to lubricating oil for lubricating piston, intake valve and exhaust valve and other parts, during the intake process, inevitably, there will be part of the oil is sucked into the combustion chamber, and in the process of exhaust, the exhaust gas temperature will also consume part of the exhaust valve of the engine oil. 3 because of the high temperature oxidation, the oil will produce steam, and through the crankcase forced ventilation valve into the combustion chamber for combustion, which is particularly evident in the turbocharged engine. 4, piston / cylinder walls are damaged, resulting in the gap is too large, so that the oil into the combustion chamber, used. 5, due to oil and other reasons lead to carbon deposition of the engine, so that the piston ring loses its elasticity, resulting in poor sealing effect or accelerated cylinder wall wear, the r