基于多数据融合传感器的分布式温度控制系统(中英文对照论文)（A distributed temperature control system based on multi data fusion sensors (Chinese and English papers)）.docVIP

基于多数据融合传感器的分布式温度控制系统(中英文对照论文)（A distributed temperature control system based on multi data fusion sensors (Chinese and English papers)） Distributed temperature control system based on multi-sensor data fusion Abstract: In the past few decades, the temperature control system has been widely used. For the temperature control of a multi sensor data fusion and CAN bus control based on general structure. A new method is to estimate the parameters of the distributed temperature control system algorithm based on multi sensor data fusion. An important feature of the system is its generality, large temperature control which is suitable for many specific areas. The experimental results show that the system has high accuracy, reliability, good real-time and wide application prospect. Key word： Distributed control system; CAN bus; intelligent CAN node; multi-sensor data fusion. 1 Introduction Distributed temperature control system has been widely used in our daily life and production, including intelligent building greenhouseconstant temperature workshop large medium granary warehouse etc.. This control to ensure environmental temperature can be maintained at a predetermined temperature between two. In the traditional temperature measuring system, we use a RS-485 to build a network LAN controller MCU system based on temperature sensor. With the aid of the network, we can carry out centralized monitoring and control. However, when the monitoring area is wider and longer transmission distance, the disadvantages of RS-485 bus become more prominent. In this case, the transmission and response speed becomes lower, the anti-interference ability becomes worse. Therefore, we should seek out a new communication method to solve the RS-485 bus control system problems. In all forms of communication, bus control technology applied to the industrial control system, we can break through the limitation of traditional point to point communication mode and build a real distributed control and ce